DPA d:dicate™ 4006ER Omni Mic, Rear Cable, XLR
Transparency, detail and depth of sound
- Acoustic authenticity
- Linear throughout a large frequency bandwidth
- Detailed and natural reproduction
- High sensitivity and low noise floor
- Excellent for concert halls and spot miking acoustical instruments
- Modular flexibility
The d:dicate™ 4006 Omni Mic offers total transparency in any recording situation. It picks up incredible detail and depth of sound. The definition of its high-frequency characteristics across a wide range of instruments is impressive. It offers natural sound, high sensitivity, low noise-floor and linear frequency response from 10 to 20 kHz (±2 dB).
This mic is linear and true in character. It has earned its status as a worldwide recording standard and is the most popular mic in our d:dicate™ Recording Microphone Series. This highly sought after mic has forged its enviable reputation over the past quarter of a century by repeatedly exhibiting its total transparency in any recording situation
d:dicate™ 4006A Omni Mic
This is a very flexible solution. Engineers, broadcasters and musicians alike can achieve clean, natural and precise sound reproduction. This mic is ideal for A-B stereo pairs for symphonic concert hall recordings. It also excels on vocals, for close miking all types of instruments.
A wide selection of accessories is available, including acoustic pressure equalizers, a nose cone and interchangeable protection grids. These accessories can acoustically transform the mic. By changing grids, it is possible to gain several unique frequency responses and directional characteristics. Furthermore, these accessories will not produce any phase shift, noise or distortion that would otherwise be introduced by an electrical filter. These accessories are available in the d:dicate™ Stereo Kits and d:mension™ and Surround Kits.
d:dicate™ 4006C Compact Omni Mic
Whenever a small, lightweight and inconspicuous microphone for top-quality recording is required, the d:dicate™ 4006C Compact Omni Mic is the perfect choice. The mic design is compact and clean.
This is a very versatile recording microphone. It is popular as an A-B stereo pair in concert halls where quality recordings can sometimes be compromised by classic architecture. The mic can be mounted, hung or concealed to create clean, transparent recordings.
It is ideal for use in theatres, opera houses, concert halls and houses of worship – anywhere there is a live audience. It can also be for film recordings, both in the studio and on location. Musicians like to use this mic to close mic some instruments, such as the double bass, trumpet and piano. At the same time, they are fantastic for ambience miking on soundstages, in sports stadiums and other environments where audience sound needs to be recorded.
d:dicate™ 4006E Omni Mic
When small, lightweight and barely visible microphones for top-quality recordings are required, the active cable design and clean, transparent sound of our ultra-compact d:dicate™ 4006E Omnidirectional Microphone makes them the perfect choice. The mic features an integrated cable solution with either side (4006ES) or rear (4006ER) cable entry.
These mics are particularly popular as A-B stereo or Decca Tree pairs in concert halls. The SM4000 Suspension Mount is included in the package, allowing the mic to be hung from the ceiling to create precision spot-miking of orchestra sections or ambience atmosphere.
This solution is ideal in theatres, opera houses, concert halls or houses of worship and for film applications, both in the studio and on location. These mics are also popular for ambience miking on soundstages, in sports stadiums and other environments where ambient sound needs to be recorded.
The d:diacate™ 4006ES replaces the non-modular legacy 4051 Omni Condenser Mic and the 4006ER replaces the non-modular legacy 4052 Omni Condenser Mic.
Combine with the preamp of your choice
As with all of the modular d:dicate™ microphones, you can combine the d:dicate™ Omni Mic Capsule with any of our preamps.
The MMP-A Microphone Preamp is an ultra-transparent, transformerless preamp with active drive for impedance balancing. The MMP-C Compact Microphone Preamp is an ultra-compact preamp with active drive for impedance balancing. It has a slightly softer character than the other preamps in the d:dicate™ Microphones Series.
Other preamps include the very small form factor types MMP-E Modular Active Cable (XLR output) and MMP-G Modular Active Cable (MicroDot output), allowing for very slim set-ups. The MMP-G even allows you to match a larger microphone directly to a wireless transmitter.
You can combine any of the preamps with any of the modular capsules in the d:dicate™ Microphones Series.
A bit about omnis
An omnidirectional microphone has sensitivity at all angles – in principle picking up sound equally from all directions. This gives you extremely natural and realistic sound compared to a cardioid mic. Omni mics are often used for picking up ambient sounds, as well as miking a large sound source such as a choir in a recording situation. Unfortunately, due to their pickup pattern, omnis can also produce a lot of feedback in live situations.
Nonetheless, we recommend that you try a DPA omni first because, when used close to the sound source, the equal frequency response makes these mics a flexible addition in your audio toolbox. It will often give a more natural sound, it can handle extremely high sound pressure levels, it does not suffer from proximity effect and is not as sensitive to wind, pop or handling noise.
Pro Audio Systems have teamed up with PayPal Credit to offer you interest free finance over 4 months on purchases over £99.
A 0% interest offer you can use again and again.
At Pro Audio Systems, great service is always part of the deal. If you’re lucky enough to live close enough to visit us here in Bradford then we’d love to see you in person but if you’re a bit further away we never let the distance stand in the way of us doing what we do best!
Not only do we stock a fantastic range of microphones, loudspeakers and amplifiers, we provide unrivalled customer care, advice and technical assistance to our customers. If you need some advice on any of our products or services – we’re here to help. If you need something quickly – we’re here to help. If you need hard-to-find specialist items, custom-made pieces, pointers on how to connect this to that – we’re here to help. We work really hard to be the kind of people we would like to buy from, and this level of service is often hard to find via impersonal and anonymous e:commerce sites.
One of our sales team will take personal responsibility for your order, from original contact to dispatch. They will help to spec the right equipment, process the order, where necessary place and chase orders with suppliers, and oversee the dispatch of goods. If you have a question at any time, pre or post sale, you can reach your dedicated contact who will be happy to help. We’ll also contact you by email or telephone, as many times as necessary, to ensure that you are kept informed every step of the way.
With specialists in PA Systems, Pro Audio & Live Sound equipment on hand to answer calls and emails, you're in the best possible hands. Contact us now to discuss your requirements or to request a quotation. Purchase orders can be sent directly to firstname.lastname@example.org